Polysilsesquioxanes with mixed self-assembled organic tethers: Alkyl chains and alkanoate-aminopropyl pairs

Hideaki Yoshitake, Taiyo Kodate, Teppei Takagi, Izuru Kawamura, Akira Naito

    Abstract

    In order to increase the adsorption rate and to improve the endurance of the structure in the adsorption of transition metal pollutants on the lamellar polysilsesquioxane adsorbent RCOOH-NH2C3H6SiO1.5, we substituted a part of the RCOOH-NH2C3H6- with a simple alkyl chain, CnH2n + 2-. We prepared the polysilsesquioxane whose organic chains are 3-aminopropyl (NH2C3H6-) and linear alkyl (C16H33-, C18H37-, C20H42- and C22H46-) groups from 3-aminopropyltrimethoxysilane (APTMS) and alkyltrialkoxysilane/alkyltrichlorosilane, respectively, without degradation of the good lamellar structure. The silanes were condensed with alkaonate (C11H23COOH (LAS), C13H27COOH (MAS), C15H31COOH (PAS), C17H35COOH (SAS)) with the same amount as APTMS. The adsorption of Cu(II) from an aqueous solution was carried out for lamellar solids prepared from C18H37Si(OCH3)3, APTMS and MAS varying the C18H37Si(OCH3)3/APTMS ratio from 0/10 to 5/5. The adsorption rate increased by up to a factor of 91 due to the presence of alkyl chains from alkylsilane, while the capacity did not change significantly except for the ratio 5/5. The mechanism for inhibition of the degradation of the self-assembling structure by the presence of C18H37-chains is discussed.

    Original languageEnglish
    Pages (from-to)9-16
    Number of pages8
    JournalReactive and Functional Polymers
    Volume99
    DOIs
    StatePublished - 2016 Feb 1

    Fingerprint

    adsorption
    MAS
    degradation
    transition element
    aqueous solution
    pollutant

    Keywords

    • Adsorption of copper (II)
    • Adsorption rate
    • Polysilsesquioxane
    • Self-assembly

    ASJC Scopus subject areas

    • Materials Chemistry
    • Polymers and Plastics
    • Chemistry(all)
    • Chemical Engineering(all)
    • Environmental Chemistry
    • Biochemistry

    Cite this

    Polysilsesquioxanes with mixed self-assembled organic tethers : Alkyl chains and alkanoate-aminopropyl pairs. / Yoshitake, Hideaki; Kodate, Taiyo; Takagi, Teppei; Kawamura, Izuru; Naito, Akira.

    In: Reactive and Functional Polymers, Vol. 99, 01.02.2016, p. 9-16.

    Research output: Contribution to journalArticle

    Yoshitake, Hideaki; Kodate, Taiyo; Takagi, Teppei; Kawamura, Izuru; Naito, Akira / Polysilsesquioxanes with mixed self-assembled organic tethers : Alkyl chains and alkanoate-aminopropyl pairs.

    In: Reactive and Functional Polymers, Vol. 99, 01.02.2016, p. 9-16.

    Research output: Contribution to journalArticle

    @article{d961601ca335480e938909d3847fd050,
    title = "Polysilsesquioxanes with mixed self-assembled organic tethers: Alkyl chains and alkanoate-aminopropyl pairs",
    keywords = "Adsorption of copper (II), Adsorption rate, Polysilsesquioxane, Self-assembly",
    author = "Hideaki Yoshitake and Taiyo Kodate and Teppei Takagi and Izuru Kawamura and Akira Naito",
    year = "2016",
    month = "2",
    doi = "10.1016/j.reactfunctpolym.2015.12.002",
    volume = "99",
    pages = "9--16",
    journal = "Reactive and Functional Polymers",
    issn = "1381-5148",
    publisher = "Elsevier",

    }

    TY - JOUR

    T1 - Polysilsesquioxanes with mixed self-assembled organic tethers

    T2 - Reactive and Functional Polymers

    AU - Yoshitake,Hideaki

    AU - Kodate,Taiyo

    AU - Takagi,Teppei

    AU - Kawamura,Izuru

    AU - Naito,Akira

    PY - 2016/2/1

    Y1 - 2016/2/1

    N2 - In order to increase the adsorption rate and to improve the endurance of the structure in the adsorption of transition metal pollutants on the lamellar polysilsesquioxane adsorbent RCOOH-NH2C3H6SiO1.5, we substituted a part of the RCOOH-NH2C3H6- with a simple alkyl chain, CnH2n + 2-. We prepared the polysilsesquioxane whose organic chains are 3-aminopropyl (NH2C3H6-) and linear alkyl (C16H33-, C18H37-, C20H42- and C22H46-) groups from 3-aminopropyltrimethoxysilane (APTMS) and alkyltrialkoxysilane/alkyltrichlorosilane, respectively, without degradation of the good lamellar structure. The silanes were condensed with alkaonate (C11H23COOH (LAS), C13H27COOH (MAS), C15H31COOH (PAS), C17H35COOH (SAS)) with the same amount as APTMS. The adsorption of Cu(II) from an aqueous solution was carried out for lamellar solids prepared from C18H37Si(OCH3)3, APTMS and MAS varying the C18H37Si(OCH3)3/APTMS ratio from 0/10 to 5/5. The adsorption rate increased by up to a factor of 91 due to the presence of alkyl chains from alkylsilane, while the capacity did not change significantly except for the ratio 5/5. The mechanism for inhibition of the degradation of the self-assembling structure by the presence of C18H37-chains is discussed.

    AB - In order to increase the adsorption rate and to improve the endurance of the structure in the adsorption of transition metal pollutants on the lamellar polysilsesquioxane adsorbent RCOOH-NH2C3H6SiO1.5, we substituted a part of the RCOOH-NH2C3H6- with a simple alkyl chain, CnH2n + 2-. We prepared the polysilsesquioxane whose organic chains are 3-aminopropyl (NH2C3H6-) and linear alkyl (C16H33-, C18H37-, C20H42- and C22H46-) groups from 3-aminopropyltrimethoxysilane (APTMS) and alkyltrialkoxysilane/alkyltrichlorosilane, respectively, without degradation of the good lamellar structure. The silanes were condensed with alkaonate (C11H23COOH (LAS), C13H27COOH (MAS), C15H31COOH (PAS), C17H35COOH (SAS)) with the same amount as APTMS. The adsorption of Cu(II) from an aqueous solution was carried out for lamellar solids prepared from C18H37Si(OCH3)3, APTMS and MAS varying the C18H37Si(OCH3)3/APTMS ratio from 0/10 to 5/5. The adsorption rate increased by up to a factor of 91 due to the presence of alkyl chains from alkylsilane, while the capacity did not change significantly except for the ratio 5/5. The mechanism for inhibition of the degradation of the self-assembling structure by the presence of C18H37-chains is discussed.

    KW - Adsorption of copper (II)

    KW - Adsorption rate

    KW - Polysilsesquioxane

    KW - Self-assembly

    UR - http://www.scopus.com/inward/record.url?scp=84949870522&partnerID=8YFLogxK

    UR - http://www.scopus.com/inward/citedby.url?scp=84949870522&partnerID=8YFLogxK

    U2 - 10.1016/j.reactfunctpolym.2015.12.002

    DO - 10.1016/j.reactfunctpolym.2015.12.002

    M3 - Article

    VL - 99

    SP - 9

    EP - 16

    JO - Reactive and Functional Polymers

    JF - Reactive and Functional Polymers

    SN - 1381-5148

    ER -