Research Center for Advanced JISSO Technology, Yokohama

Research Output 1991 2016

2016
1 Citations

Analysis of sintering behavior of silicon nitride based on master sintering curve theory of liquid phase sintering

Tatami, J., Hiratsuka, D., Okada, S., Komeya, K. & Wakihara, T. 2016 Apr 1 In : Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan. 124, 4, p. 375-380 6 p.

Research output: Contribution to journalArticle

Sintering
Powders
Liquid phase sintering
Silicon nitride
Displacement measurement

Etching rate behavior of 4H-silicon carbide epitaxial film using chlorine trifluoride gas

Hirooka, A., Habuka, H. & Kato, T. 2016 Materials Science Forum. Trans Tech Publications Ltd, Vol. 858, p. 715-718 4 p. (Materials Science Forum; vol. 858)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
Epitaxial films
Chlorine
Etching
Substrates

Formation and removal of carbon film on silicon carbide surface using chlorine trifluoride gas

Hirooka, A., Habuka, H., Takahashi, Y. & Kato, T. 2016 In : ECS Journal of Solid State Science and Technology. 5, 7, p. P441-P445

Research output: Contribution to journalArticle

Carbon films
Silicon carbide
Etching
Chlorine
Gases

Inhibition of grain growth by MgO in laser-melted Al2O3 capillary microstructure

Honma, T. & Tatami, J. 2016 Mar 1 In : Materials Chemistry and Physics. 171, p. 1-5 5 p.

Research output: Contribution to journalArticle

Laser beam effects
Grain growth
Grain boundaries
Melting
Annealing

In situ cleaning process of silicon carbide epitaxial reactor for removing film-type deposition formed on susceptor

Mizuno, K., Habuka, H., Ishida, Y. & Ohno, T. 2016 Materials Science Forum. Trans Tech Publications Ltd, Vol. 858, p. 237-240 4 p. (Materials Science Forum; vol. 858)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
Cleaning
Chlorine
Etching
Gases

Material evaluation and development support project for high current SiC power module

Iguchi, T., Takahashi, A. & Habuka, H. 2016 Jul 25 Proceedings of the 2016 28th International Symposium on Power Semiconductor Devices and ICs, ISPSD 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-July, p. 131-134 4 p. 7520795

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon carbide
Semiconductor devices
Carbon dioxide
History
Powders
Microstructural evolution
Fracture toughness
Mechanical properties
Bending strength

Non-heat assistance chemical vapor deposition of amorphous silicon carbide using monomethylsilane gas under argon plasma

Shioda, K., Tanaka, M., Hirooka, A. & Habuka, H. 2016 Jan 15 In : Surface and Coatings Technology. 285, p. 255-261 7 p.

Research output: Contribution to journalArticle

Silicon carbide
Argon
Plasmas
Substrates
Gases

Photosensitive polyimide-silicone copolymer based on reaction development patterning (RDP)

Oyama, T., Kasahara, A., Yasuda, M. & Takahashi, A. 2016 In : Journal of Photopolymer Science and Technology. 29, 2, p. 273-276 4 p.

Research output: Contribution to journalArticle

Polyimides
Silicones
Copolymers

Preface

Naito, M., Ewsuk, K., Tatami, J. & Iijima, M. 2016 In : Advanced Powder Technology.

Research output: Contribution to journalArticle

Soldering alloys
Liquids
Epoxy resins
Printed circuit boards
Resins
Epoxy resins
Ethers
Semiconductor devices
Silicon carbide
Thermodynamic stability

Silicon Nitride Ceramics for Tribological Applications

Tatami, J. & Komeya, K. 2016 Jan 15 Engineered Ceramics: Current Status and Future Prospects. Wiley Blackwell, p. 124-141 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Silicon nitride
Densification
Sintering
Chemical analysis
Bearings (structural)

Spark plasma sintering of functionally graded SiO2/Mo laminated layer material

Honma, T. & Tatami, J. 2016 Jan 1 In : International Journal of Applied Ceramic Technology. 13, 1, p. 50-55 6 p.

Research output: Contribution to journalArticle

Spark plasma sintering
Acoustic impedance
Joining
Cracks
Powders

Spark plasma sintering of silicon nitride using nanocomposite particles

Jeong, K., Tatami, J., Iijima, M. & Nishimura, T. 2016 Apr 28 In : Advanced Powder Technology.

Research output: Contribution to journalArticle

Nanocomposites
Powders
Spark plasma sintering
Ball milling
Sintering
1998
4 Citations

Novel aprotic polar polymers IV. synthesis of poly[N-bis(dimethylamino)phosphorylethylenimine] as a polymer homolog of hexamethylphosphoramide

Oyama, T., Ohkubo, Y., Naka, K. & Chujo, Y. 1998 In : Polymer Journal. 30, 12, p. 1008-1010 3 p.

Research output: Contribution to journalArticle

Polymers
1991
Temperature
Thermoelectric energy conversion
Semiconductor materials
Solar cell arrays
Cascade connections